0118 9821 555

Call now, no waiting | Answers immediately

We are the UK’s leading authorised
Pentair Jung Pumpen GmBH distributor & stockist

Nationwide Delivery: Fully Stocked Warehouse

Mon to Fri: 9:00am – 5:00pm: Same Day Despatch

Call Our Team To Order: 0118 9821 555

  • abs_robusta_light_drainage_pump

    Light drainage pump type ABS Robusta

    For the smaller pumping challenges

    The Robusta 200 and 300 models are plug-in, submersible pumps designed to remove wastewater containing solids up to 10 mm. The pump and motor form a pressure-tight encapsulated fully flood-proof unit . For a longer service life, the high head version of Piranha S has a reversible cutter that can be rotated. The cutter face can be used on each sides before the cutter needs replacing. Adjustable bottom plate on Piranha PE and S To counteract the effects of wear and to maintain efficiency, the optimum clearance between the bottom plate and the impeller can easily be restored.
    • Thermal sensors
    • Three lip seals lubricated by a grease chamber
    • Protection type IP 68
    • Stainless steel rotor shaft supported in lubricated-for-life ball bearings
    • Motor housing made of corrosion-resistant material, and the outer jacket and impeller of durable plastics
    • 60 Hz version available with approval (UL, CSA)
  • light_wastewater_pump_mf_504_with_level_control

    Light wastewater pump type ABS MF 154-804

    Meeting all your dewatering needs

    The MF 154-804 is a compact submersible pump range for reliable and effective drainage. Designed to fit small sump requirements, to enable quick and cost effective installations.
    • Thermal sensors
    • Oil-lubricated mechanical seal medium side; oil-lubricated lip seal at motor side
    • Stainless steel rotor shaft supported in lubricated-for-life ball bearings
    • Easy fit plug-in cable connection
    • Single-phase fitted with Schuko plug; three-phase with CEE plug
  • mf_154_and_hw_hotwater_pump

    Light wastewater pump type ABS MF 154HW

    Pump away at high temperatures

    The MF 154HW is a compact submersible hot water pump for the removal of domestic and commercial high temperature wastewater. The pump is equipped with vortex hydraulics for blockage-free pumping in applications where the temperature of the medium exceeds the standard upper limit (40 °C) to a maximum allowable temperature of 80 °C.
    • Fitted with a water tight, fully flood-proof cast iron motor and a hydraulics section
    • Thermal sensors
    • Oil-lubricated mechanical seal medium side; oil-lubricated lip seal at motor side
    • Stainless steel rotor shaft supported in lubricated-for-life ball bearings
    • Easy fit plug-in cable connection, fitted with Schukoplug
  •

    Muffin Monster™ inline/open channel grinders

    Monsters keep wipes away

    For addressing challenges in sewers or tackling pump blockages, the Muffin Monster™ stands out as the optimal choice. This sewer grinder efficiently deals with wipes and rags, thereby minimising pump maintenance and preventing sewer blockages. Functioning as a shredder, it grinds debris into tiny particles that all pumps can manage efficiently, ensuring pumps operate at their highest performance levels. The grinder comes in three distinct models, each offered in two configurations.
  • submersible_grinder_pump_piranha

    Submersible grinder pump type ABS Piranha

    Pump and grind with our Piranha range

    Piranha sewage pumps with shredding action provide reliable and economical discharge of effluent under pressure. Used in high pressure sewage systems, they offer an economical alternative where the terrain doesn't permit the use of gravity sewers. Unique cutting system for Piranha PE and S This cutter system has a unique concept in grinder pump design. It consists of a spiral bottom plate and a stationary cutter ring combined with a shredding rotor located in front of the impeller, for optimum blockage-free running. The shredding system can shred challenging items such as cloths and plastic bags. For a longer service life, the high head version of Piranha S has a reversible cutter that can be rotated. The cutter face can be used on each sides before the cutter needs replacing. Adjustable bottom plate on Piranha PE and S To counteract the effects of wear and to maintain efficiency, the optimum clearance between the bottom plate and the impeller can easily be restored.
  • xfp_submersible_pump_family

    Submersible sewage pump type ABS XFP

    Submersible sewage pumps type ABS XFP are the best choice for ensuring efficient and reliable pumping in any wastewater pumping station. The submersible wastewater pumps, mainly installed in network pumping stations, are equipped with Premium Efficiency IE3 motors as standard and with the Contrablock Plus impellers. They are designed to process today's wastewater mainly composed of less water due to low-flush toilets and a range of sanitary items such as wipes, fibre material, etc.

    Features

    • Premium Efficiency IE3 motors in acc. with IEC60034-30 (from 1.3 - 550 kW in 50 Hz and 2.7 - 830 hp in 60 Hz)
    • Contrablock Plus type single and two vanes, and vortex impellers (1.3-30 kW)
    • Contrablock Plus type multi-vane, closed and skew-type impellers (30-620 kW)
    • Solid passage min. 75 mm and greater
    • Explosion-proof version as option (ATEX, FM or CSA)
    • Closed cooling system (PE1-2)
    • Closed-loop cooling system - standard in PE6 (PE3-PE5 optional)
    • Temperature rise according to NEMA Class A up to 110 kW and Class B above
    • Class H (140°C) insulation
    • Condition monitoring (temperature, water ingress)
    • 100'000 hours bearing life (50'000 hours on PE1-2)
  • Submersible wastewater pump type ABS AS

    Submersible wastewater pump type ABS AS

    The AS range are robust, reliable submersible pumps from 1 to 3 kW for pumping wastewater and sewage from buildings and sites. The pumps have water pressure-tight, encapsulated, fully flood-proof motors in standard and explosion-proof versions.

    Features

    • Thermo Control System (TCS) with thermal sensors in the stator in order to switch the pump off in the event of overheating and switch it on automatically after cooling down (option on standard AS)
    • High-quality sealing unit using a silicon carbide mechanical seal between the motor and the hydraulic section, ensuring independent rotation direction and providing resistance to temperature shock
    • Oil-lubricated lip seal at motor side
    • Stainless steel rotor shaft supported in lubricated-for-life ball bearings
    • Ex protection to II 2G Ex h db IIB T4 Gb and FM international standards
    • Available in three discharge sizes: DN 50 (G2"), DN 65 (G2½"), and DN 80 (G3")
    • Free-standing on legs or pedestal-mounted

COMPANY ADDRESS

Pump Technology Ltd
Unit 56, Youngs Industrial Estate
Aldermaston
Berks
RG7 4PW

No.2728695

CONTACT US

Telephone: 0118 9821 555
Fax: 0118 982 1666
Email: support@pumptechnology.co.uk

GROUP COMPANIES

PROUD TO BE A MEMBER OF

SoPHE logo with sponsorship

Copyright 2022 Pump Technology
Privacy Policy | Cookie Policy | Environmental Policy | Quality Policy | T & C’s

Go to Top